News

Greenlee EK06FT11-Gator Plus Quad-Point Battery-Powered Crimping Tool, Flip-Top Head Dieless


EK06FT Dieless Battery Powered Crimper

Two-speed pump advances the ram quickly to start the crimp, reducing crimp completion time. The ram automatically retracts after the crimp is complete. Lightweight, featuring an angled pistol grip and a 360 rotating head. UL and cUL classified with #4AWG - 750 kcmil (MCM) copper color-coded connectors and #6AWG - 750 kcmil (MCM) aluminum color-coded connectors of the following brands: Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and Thomas & Betts. Flip-top style uses a pull pin to open head for easy removal from the connector. Utilizes four indentors to make the crimp.

Instruction Manual

 

 

Greenlee EK124011-Gator Plus 12-Ton Battery-Powered Crimping Tool


EK1240 Battery Powered Crimper

Capacity: 8 AWG to 750 kcmil copper color-coded lugs and splices

EK1240 crimping head for industry "U" type dies with 1.65" (42 mm) opening. New head designs result in lower weight and improved durability - tested to 50,000 crimp cycles. Two-speed pump to reduce cycle time. Ram automatically retracts when crimp cycle is complete - a Greenlee exclusive. Crimping heads rotate 360°. UL and cUL classified with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and Thomas & Betts copper color-coded lugs and splices. Powerful 12 volt 2.0Ah battery provides up to 35 crimps per charge.

Instruction Manual

 

 

Greenlee EK22GL11-Gator Plus 6-Ton Battery-Powered Crimping Tool


EK22GL Battery Powered Crimper

Capacity: Color-coded copper lugs and splices, 600 kcmil (MCM). Color-coded aluminum lugs and splices, 350 kcmil (MCM).

UL and cUL Classified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Penn-Union and T & B copper lugs and splices to 600 kcmil (MCM) and with aluminum lugs & splices to 350 kcmil (MCM). Flip-top style opens easily with a simple pull on the side piece and rotates 360°. Equipped with die adapters for "W" type dies. The adapters are equivalent to "D3" dies. A two-speed pump advances the ram quickly to start the crimp. Crimp times range from about 5 to 7 seconds depending on the connector. Powerful 12 volt 2.0 Ah battery provides up to 120 crimps per charge.

Instruction Manual

 

 

Greenlee EK12ID11-Gator Plus Battery-Powered Crimping Tool, Flip-Top Head Dieless


EK12ID Dieless Battery Powered Crimper

EK121D features a flip open indentor crimping head capable of crimping a wide range of lugs and splices. Tools are UL and cUL Classified for 8 brands of aluminum color-coded code connectors from 6 AWG to 1,000 kcmil and for 8 brands of copper-coded code connectors from 4 AWG to 1,000 kcmil. Resulting crimps show single indentation marked with Greenlee logo for future identification of tool that made crimp. Powerful 12 volt 2.6Ah battery provides up to 35 crimps per charge.

Instruction Manual

 

 

Greenlee ES3211-Cutting Tool


ES32 Battery Powered Cable Cutter

The ES32 features unique two-step scissors style cutting blades to cut up to 500 kcmil (240 mm2). This scissors style along with the thin profile of the tool makes it easy to cut cable in tight places. The ES32 also features a patented "friction drive" that results in a small and lighter tool. Using the ES32 is easy. For cables less than 500 kcmil(240 mm2), simply put the cable as deep as possible between the blades and pull the trigger. When the cut is complete the tool will stop and the blades will automatically open for the next cut. Cutting 500 kcmil (240 mm2) cable requires two cycles. First, put the cable as deep as possible between the blades and pull the trigger. When the cycle is complete and the blades open, move the cable deeper between the blades and pull the trigger again. This time when the cycle is complete the cable will be cut cleanly and completely. Small, light weight, ergonomic shape. Patented friction drive. Cutting blades automatically open when the cut is complete. Cutting head rotates 350° for access to tight spaces. Tool completes approximately 80 cutting cycles per battery charge. (Note: Cutting 500 kcmil cable requires two cycles per cut)

Instruction Manual

 

 

ESG50GL Gator Plus Cordless Cutter


Gator Plus Cordless Cutter

• Cuts up to 2" AL or CU cable.
• Ram automatically retracts after the cut is complete. No need to push a retract lever. Tool is automatically ready to perform the next cut.
• Two-speed pump advances the ram quickly to start the cut.
• Cutting blades are specially hardened and precision ground to hold their sharpness.
• Lightweight and easy to use.
• Cutting head rotates 360° for making cuts in tight locations, and flips open to make mid-span cuts easy.

Instruction Manual

 

 


We provide 24/7 rental services.

Contact us at 1-866-899-2895 or 1-866-680-6017.

Home - Contact Us
December 10, 2018